WFC112, 2,500 lbs Capacity, 0.36 in Stroke, Work Support, Cartridge Style, Hydraulic Advance
Item ID: WFC112
$590.91
Free Shipping
Product Specifications
Maximum Operating Pressure (bar)350
Maximum Operating Pressure (psi)5000
Stroke (inch)0.36
Available - Backorder
About this Product
Features
- Plunger stays retracted until pressure is applied allowing unobstructed loading
- Low pressure lock-up capability enables the use of machine tool hydraulic systems
- High rated support capacities allow for more compact fixture design
- Corrosion resistant materials – compatible with most coolants and environments
- Threaded and manifold air vent ports allow fixturing that prevents coolants and debris from being ingested into the mechanism
- Minimized deflection increases machining accuracy
- Multiple mounting configurations for design flexibility
- Contact bolt included
- Support force and clamping force must be matched. Support force should be at least 150% of clamping force.
- Do not exceed maximum flow rates to avoid premature lockup.
- Always center load over work support.
- Enerpac work supports provide either additional non-fixed location points to the clamps, or support to larger or thin section workpiece components, always in order to minimize workpiece deflection during machining.
Units:
Maximum Operating Pressure (psi)5000
Mounting StyleCartridge
Maximum Support Force (lbs)2500
Plunger Contact Spring Force Advance (lbs)3.4
Plunger Contact Spring Force Retract (lbs)5.2
Oil Capacity (in3)0.06
Maximum Oil Flow (in3/min)60
Stroke (inch)0.36
Ventilation Below Force RequiredYes
Weight (lbs)2
80%
Think Safety
Manufacturer's rating of load and stroke are maximum safe limits. Good practice encourages using only 80% of these ratings!