ZE6210XJ-S, Electric Hydraulic Pump for EDCH Cutters, Manual Valve, 2.5 gallon Usable Oil, 460-480V - 3 ph motor
Item ID: ZE6210XJ-S
$1.00
Est. Ship date is Tue, Mar 16th 2027
Product Specifications
Reservoir Capacity (cm3)10000
Maximum Operating Pressure Ranges (psi)10000
Output Flow Rate 100 psi (in3/min)200
Available - Backorder
About this Product
Features
- A specialty Enerpac ZE6-Series electric pump model provides the precise flow required by Enerpac's hydraulic cutters.
- A specially adapted twin hose connects the pumps directly with the cutters, allowing for complete control from the cutters themselves
- Controlled directly from cutter with no pendant required
- Powered by an induction motor for industrial applications that require extended duty cycles
- IP54 Rating for superior dust and water protection
- Single-Stage Pump
- Cutter tool, pump and hose are all sold separately, and all are required for the system to function.
Units:
Maximum Operating Pressure (psi)10000
Reservoir Capacity (in3)601
Usable Oil Capacity (gal)2.5
Output Flow Rate 100 psi (in3/min)200
Output Flow Rate 10,000 psi (in3/min)200
Motor Size (hp)7.5
Motor Hertz50/60 Hz
Motor Phases3 Ph
Motor Voltage460-480 V
Duty CycleExtended
Valve OperationManual
Power SourceElectric
Motor Electrical Specification460-480 V, 3 ph, 50/60 Hz
Weight (lbs)170
80%
Think Safety
Manufacturer's rating of load and stroke are maximum safe limits. Good practice encourages using only 80% of these ratings!